Product Description
Tapered Roller bearing 35715 / Metric roller bearing
Feature
- Quality Materials
- Precision Tolerance
- Optimizing Internal Geometries
Product Description
- Tapered roller bearing normally be composed of a cup and a cone assembly, it precisely designed to manage both axial and radial load, even in the most unforgiving conditions . Single row tapered roller bearings are the most basic and widely used, CZPT built the first production lines in 1996 and today offers the world’s widest variety both in inch and metric sizes.
- with performance-enhancing features for severe-duty applications, VAFEM LM-Series wheel bearings help increase fuel efficiency, improve load-carrying capacity, fit in popular axle and hub designs – and simplify installation – helping you gain fleet uptime. Commercial Vehicle Hub Rebuild Kits are available for severe duty, dual and wide single tire applications .
- Design Attributes:
- Raw material: Manufactured with reliable super-clean chrome steel, these long-lasting bearings are designed to meet severe-duty application requirements.
- Tight tolerances: Uniform internal geometry, including angle of contact for cones and rollers, creates a precise match between cup and cone – extending bearing life.
- Precision profiles: Internal raceway profiles reduce stress on bearing components by distributing the loads evenly across contact surfaces – increasing load-carrying capacity.
- Super finishing surface: Advanced automatic finishing processes generate smoother surface finishes on races and rollers to reduce friction – helping increase fuel efficiency.
- Flexibility: Engineered for severe-duty applications in any configuration – dual and wide singles – LM-Series wheel bearings maintain consistency and simplicity within fleets.
- Compatibility: LM-Series wheel bearings fit popular axle and hub designs, allowing retrofit into existing equipment.
Design Attributes:
- Accurate Bearing Setting: Set-Right kits feature bearings that significantly reduce the width variation found in standard bearings. Our tight bearing width tolerance enables consistent and accurate bearing setting of pre-adjusted hubs.
- Consistent Bearing Setting: Consistently achieve proper wheel bearing setting, avoiding the need for manual bearing adjustment and promoting optimum bearing and seal life.
- Streamlined Inventory Management: With a wide range of part numbers, each kit features 2 VAFEM matched bearing sets and a precision-machined spacer (various of spacer types available).
- More Uptime: manufactured with super-clean high-strength chrome steel, precision profiles and enhanced surface finishes, feature high load ratings, and outlast and outperform competitor bearings.
- Longer Bearing Life and Performance
- As a domestic leader in roller bearing technology, we develop bearings to outlast and outperform those frequently used on original equipment.
Applications
- Commercial vehicles (original equipment and aftermarket)
- Wheel hub Kits ( After market )
- Heavy duty trucks, tractors and construction machinery (original equipment and aftermarket)
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Body: | Roller Bearings |
|---|---|
| The Number of Rows: | Single |
| Outer Dimension: | Small and Medium-Sized (60-115mm) |
| Material: | Bearing Steel |
| Spherical: | Non-Aligning Bearings |
| Load Direction: | Axial Bearing |
| Customization: |
Available
| Customized Request |
|---|
Variations in Cup Bearing Designs for Different Operating Conditions
Cup bearings come in various designs tailored to different operating conditions and requirements. Some common variations include:
- Tapered Cup Bearings: These are designed to handle both radial and axial loads and are commonly used in applications like automotive wheel hubs.
- Needle Roller Cup Bearings: Needle rollers provide high load-carrying capacity in a compact design, making them suitable for applications with limited space.
- Thrust Cup Bearings: These are designed to withstand axial loads and are often used in applications like automotive transmissions.
- Precision Cup Bearings: These bearings are manufactured to tight tolerances for high-precision applications such as machine tools and aerospace equipment.
- Stainless Steel Cup Bearings: Stainless steel construction provides corrosion resistance, making them suitable for food processing and marine applications.
- Plastic or Nylon Cup Bearings: These lightweight bearings are used in low-load, low-speed applications where corrosion resistance and low friction are needed.
- Heavy-Duty Cup Bearings: These robust bearings are designed for heavy radial and axial loads, commonly found in construction and agricultural machinery.
Each variation is optimized for specific conditions and load types, ensuring optimal performance and longevity in various industrial and mechanical applications.
Innovations in Cup Bearing Technology
Recent advancements in cup bearing technology have led to improved performance, reliability, and versatility. Some notable innovations include:
1. Advanced Materials: The development of new materials, such as advanced ceramics and high-performance polymers, has increased bearing durability and resistance to extreme conditions.
2. Enhanced Seals and Shields: Modern cup bearings feature improved sealing technologies that provide better protection against contamination, moisture, and other environmental factors.
3. Lubrication Systems: Some cup bearings now incorporate advanced lubrication systems, including automatic lubrication units, to ensure consistent and optimal lubrication levels.
4. Smart Bearings: IoT (Internet of Things) and sensor technology have enabled the creation of “smart” cup bearings that can monitor their own performance, providing real-time data on conditions and wear.
5. Customization: Manufacturers offer more customization options, allowing customers to tailor cup bearings to their specific application requirements.
6. Improved Load Ratings: Advancements in design and materials have increased the load-carrying capabilities of cup bearings, expanding their utility in heavy-duty applications.
7. Sustainable Practices: Bearing manufacturers are increasingly adopting eco-friendly materials and production processes, contributing to sustainability efforts.
These innovations have expanded the range of applications for cup bearings and have made them more reliable, efficient, and environmentally friendly. As technology continues to evolve, we can expect further improvements in cup bearing performance and capabilities.
Components of a Cup Bearing Assembly and Their Roles
A cup bearing assembly consists of several components, each with a specific role in its operation:
1. Cup (Outer Ring): The cup, often referred to as the outer ring, is a hardened steel component with a precisely machined raceway. It serves as the outer race and provides structural support for the bearing. The cup’s role is to maintain the proper distance and alignment between the rollers.
2. Cone (Inner Ring): The cone, or inner ring, is another hardened steel component. It has a matching raceway that fits with the cup’s raceway. The cone serves as the inner race and contains the rolling elements. Its role is to maintain proper alignment and spacing of the rolling elements.
3. Tapered Rollers: Tapered rollers are the rolling elements that transmit the loads and facilitate smooth rotation. They are arranged between the cup and cone and are designed with a tapered shape to distribute loads evenly along the raceways, reducing the risk of edge loading and premature wear.
4. Cage (Retainer): In some cup bearing assemblies, a cage or retainer is used to maintain the spacing and orientation of the rollers. The cage ensures that the rollers do not come into direct contact with each other, reducing friction and wear while promoting smooth rolling.
5. Lubrication: Proper lubrication is crucial for the efficient operation of cup bearings. Lubricant, often grease or oil, reduces friction, dissipates heat, and minimizes wear. It also helps prevent corrosion and extends the bearing’s service life.
6. Seals and Shields: In many cup bearing applications, seals and shields are employed to protect the bearing’s internal components from contaminants and moisture. Seals create a barrier to prevent the entry of foreign particles, while shields provide limited protection while allowing some ventilation.
7. Bearing Housing: The bearing assembly is often mounted within a bearing housing, which secures it in place and aligns it with the rotating shaft. The housing provides support and ensures proper axial and radial alignment of the cup bearing.
All these components work together to facilitate the smooth and reliable operation of a cup bearing, handling various loads while minimizing friction and wear, thereby extending the bearing’s lifespan and contributing to the efficiency of the machinery it serves.
editor by CX 2024-03-27