China factory High Quality Drawn Cup Needle Roller Bearing with N Series with high quality

Product Description

High Quality Drawn Cup Needle Roller Bearing with N series

The needle bearing is roller bearing with a cylindrical roller, which is both thin and long with respect to its diameter. In spite of the smaller cross-section, the bearing still has a high load bearing capacity. The needle bearing is equipped with thin and long rollers (roller diameter D ≤ 5mm, L/D ≥ 2.5, L means the length of the roller), therefore its radial structure is compact. When the inner diameter size and load capacity are the same as those of other types, the outer diameter is the smallest, which is particularly suitable for a support structure in which the radial installation size is limited.

Structure type of needle bearing
This type of bearing has a radial needle and thrust full of ball, or with a thrust ball, or with a thrust cylindrical roller, or with the angular contact ball into one, can withstand unidirectional or two-way axial load. Can also be designed according to the user’s specific structural requirements.
Materials of needle bearing
Needle roller material for the GCr15 bearing steel, hardened HRC60-65.
Inside and outside the ring material for the GCr15 bearing steel, hardened HRC61-65.
The cage material is made of high quality mild steel or reinforced nylon.
Application of needle bearing
It is widely used in machine tools, metallurgical machinery, textile machinery and printing machinery and other machinery and equipment, and mechanical design can be more compact and smart.

Needle Roller Bearing workshop 

ZYS HangZhou Bearing Science And Technology co.,ltd.                                     

ZYS Tenet: To lead the science and technology development of bearing industry and to
                   improve the world’sequipment level.

ZYS Spirit: To keep continuous improvement, to pursue brilliance.

ZYS Core values: Integrity, rigor, innovation, mutual benefit.

      ZYS was formerly known as HangZhou bearing research institute, which was founded in 1958 and was the only first-class comprehensive research institute in China bearing industry. As it became 1 member of China National Machinery Industry Corporation in 1999, the former institute was transformed into the science and technology enterprise. Then HangZhou Bearing Science & Technology Co., Ltd. was established in 2001. It was listed at HangZhou Stock Exchange with stock code 57146 in 2005.

ZYS Advantage

      CZPT has a strong strength of manufacturing high-precision and high-reliability bearings and relevant parts. CZPT company not only possesses advanced bearing manufacturing equipments and international first-class measuring instruments,but also has strong strength of manufacturing,inspecting and testing the high-precision and high-reliability bearings and relevant spare parts.In the meantime,it always keeps a leading position in bearing basic theory,lubrication technology,design,material,test,information criterion and other aspects.

Glory

Top 200 most promising companies of China in Forbes

Top 500 in China Machinery Industry

Excellent Enterprise with China Well-know Trademark

High-performance Bearings Laboratory

State Quality Supervision and Testing Center for Bearing

ISO/TC4 China Secretariat

The Research Center for High-speed Precision Bearing Engineering in Machinery Industry

                                                              … …

      We would like to and ready to do business with any company from all over the world.If any of CZPT products interests you or if you have interests in CZPT company, please don’t hesitate to contact with us,we would like to give you CZPT best quality service any day any time !

         Contact us          

Address: No.1 HangZhou Road, HangZhou City, ZheJiang , Province, China.

Zip Code:471039                   

Website:chinazys

 

                                     OTHER HOT SALE PRODUCTS IN OUR COMPANY
High precision angular contact ball bearing                        Precision spindle bearing
Hybrid ceramic bearing                                                            Slewing bearing
Cylindrical roller bearing                                                          Needle roller bearing
Taper roller bearing                                                                  Precision lathe bearing
Bearing measuring instrument                                              YRT rotary table bearing
High-frequency spindles                                                          Dental drill bearing
Bearing ball                                                                                Bearing making machine
                                                                                etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: 1250mm
Material: Stainless Steel
Spherical: Non-Aligning Bearings
Load Direction: Axial and Radial Load
Customization:
Available

|

Customized Request

cup bearing

Impact of Proper Installation and Alignment on Cup Bearing Performance

Proper installation and alignment are critical factors that significantly impact the performance and longevity of cup bearings in machinery and equipment. Here’s how they influence bearing performance:

1. Load Distribution: Correct installation ensures that the load is evenly distributed across the bearing’s raceways. Improper alignment can lead to concentrated loads on specific areas, causing premature wear and potential bearing failure.

2. Reduced Friction: Precise installation and alignment help minimize friction within the bearing, which is essential for smooth operation and energy efficiency. Reduced friction can also lead to less heat generation.

3. Noise and Vibration: Proper alignment reduces noise and vibration levels, promoting a quieter and more comfortable working environment. Misalignment can result in increased noise and unwanted vibrations.

4. Longevity: When installed correctly and aligned accurately, cup bearings are more likely to reach their expected service life without experiencing premature failure due to uneven wear and damage.

5. Performance Consistency: Well-aligned cup bearings deliver consistent and predictable performance, which is essential in applications where precision and reliability are paramount.

6. Maintenance Reduction: Correctly installed and aligned cup bearings typically require less maintenance and lubrication, as they experience less wear and tear during operation.

Proper installation and alignment involve following the manufacturer’s guidelines, utilizing suitable tools and equipment, and ensuring that the bearing is correctly seated and aligned with the mating components. Any deviations from the recommended installation and alignment procedures can lead to reduced bearing life and potential operational issues.

cup bearing

Challenges and Limitations of Cup Bearings in Different Environments

Cup bearings, while versatile and reliable, have specific challenges and limitations based on the environments in which they are used:

1. Contaminants: In environments with high levels of contaminants, such as dust, dirt, or moisture, cup bearings may require enhanced sealing to prevent particle ingress, which can lead to premature wear and failure.

2. Temperature Extremes: Cup bearings may not perform optimally in extreme temperature conditions. High temperatures can affect lubrication properties and reduce bearing life, while low temperatures can cause stiffness and reduced flexibility.

3. Corrosive Environments: Exposure to corrosive substances, like chemicals or saltwater, can lead to bearing corrosion. In such cases, selecting materials with high corrosion resistance is crucial.

4. Shock and Vibration: Machinery subjected to high levels of shock and vibration may experience accelerated wear in cup bearings. Proper mounting and maintenance are essential in these situations.

5. Heavy Loads: While cup bearings can handle substantial loads, there are limitations to the magnitude and type of loads they can support. In applications with extremely heavy loads, larger or specialized bearings may be required.

6. Misalignment: Excessive misalignment can cause uneven load distribution, leading to wear and reduced bearing life. Proper alignment and choice of bearing type can mitigate this challenge.

7. Speed: Extremely high-speed applications may require specialized bearing designs to prevent issues like heat buildup and premature wear.

8. Lubrication: In applications where lubrication is crucial, cup bearings should receive regular maintenance to ensure proper lubrication levels and prevent dry running.

Understanding these challenges and limitations is essential in selecting the right cup bearings and implementing appropriate maintenance practices to maximize their performance and longevity in various environments.

cup bearing

Comparison of Cup Bearings with Other Bearing Types

Cup bearings, also known as tapered roller bearings, differ from other bearing types like ball bearings and roller bearings in several ways:

1. Load Capacity: Cup bearings are designed to handle both radial and axial loads, making them suitable for applications with combined forces. Ball bearings primarily handle radial loads, while roller bearings, including cup bearings, can manage both radial and axial loads.

2. Tapered Design: Cup bearings have a tapered design, which helps distribute loads more evenly, reducing the risk of damaging the bearings. Ball bearings have a different internal structure with small, spherical rolling elements, while roller bearings have cylindrical or tapered rollers.

3. Precision and Accuracy: Ball bearings, especially precision ball bearings, offer high levels of accuracy and low friction, making them suitable for applications where precise movement is essential. Cup bearings can provide precision but are typically used in applications with moderate to heavy loads.

4. Lubrication: Lubrication requirements can vary among bearing types. Cup bearings typically require adequate lubrication to operate efficiently. Ball bearings may need less lubrication due to their low friction design.

5. Versatility: Ball bearings and roller bearings come in various configurations, making them versatile for different applications. Cup bearings are primarily used in applications where tapered rollers are advantageous, such as automotive wheel hubs and gearboxes.

6. Specialized Applications: Some applications may benefit from specialized bearings like ball screws with ball bearings for high precision linear motion or spherical roller bearings for applications that require misalignment compensation.

The choice between cup bearings, ball bearings, and roller bearings depends on the specific needs of the application, including the type and magnitude of loads, operating conditions, and precision requirements. Each bearing type has its advantages and limitations, making proper selection essential for optimal performance and longevity.

China factory High Quality Drawn Cup Needle Roller Bearing with N Series   with high qualityChina factory High Quality Drawn Cup Needle Roller Bearing with N Series   with high quality
editor by CX 2024-05-14

Recent Posts