China High Density Antimony Impregnated Carbon Graphite Bearing wheel bearing

Merchandise Description

Solution Description

  Graphite ring

Graphite seal ring is mainly utilised for mechanical market. Primarily based on functioning problem, pertinent graphite substance can be supplied. And the dimensions are as for every drawing.

 

Resin impregnated carbon graphite, improve the energy and use resistance, decrease the substance porosity.

Metal impregnated carbon graphite, improve the density, large temperature resistance.

 

Product Device Guarantee Value Standard Value
Max Grain size mm .eight .8
Bulk Density g/cm3 ≥1.seventy two 1.75
Electric powered Resistance μΩ.m ≤9 eight.three
Bending Strength MPa ≥14.five seventeen.five
Compressive Strength MPa ≥32 40
Thermal Conductivity W/(m▪K) ≥120 140
C.T.E(100-600)ºC 10-6/ºC ≤2.8 two.four
Ash Content % ≤0.two .09

  

    Higher pure graphite substance
Item Unit baked 3 time baked 4 moments
impregnated two times Impregnated three moments
grain size mm ≤325mesh ≤325mesh
Bulk density g/cm3 ≥1.78 ≥1.eighty five
Particular resistance μΩ.m ≤14 ≤13
Bending energy MPa ≥40 ≥45
Compressive power MPa ≥60 ≥65
Ash content material % ≤0.1 ≤0.05

 

Merchandise Device Isostatic graphite
grain size μm 5-22
Bulk density g/cm3 one.8-1.85
Specific resistance μΩ.m ten-fifteen
Bending strength MPa ≥40
Compressive power MPa ≥70
C.T.E.(100-600) °C 10-six/°C 3.2-5.2
Modulus of elasticity GPa 9.5-twelve.5

There are different picks of the resources. Based mostly on the operating setting, our engineers will offer the appropriate graphite materials.
 

Our Rewards:

1. Particular remedy on graphite plate with longer service life.

2. Numerous dimensions in accordance to customers’ needs

three. Precise machining precision

4. Appropriate tips dependent on your situation

five. Stable right after-sale services

 

 

Thorough Images

 

Our Provider

one. Supply various supplies assembly customers’ requires

2. Offer you tips for content selection, specification presentation, use situation

3. Manufacture with ine tolerance accuracy

4. Samples are offered to test 1st

five. Acknowledge the customized proportions

6. Preserve after-sale support

Company Profile

HangZhou CZPT Co., Ltd
1.Specialized in generating graphite merchandise. 

two.Major products:  graphite block, graphite plate, graphite rod, graphite tube, graphite mildew, graphite crucible, graphite rotor&shaft, graphite sealing, graphite felt, carbon vane, ect.

three.Workshops: NC machining centre, NC processing line, pot kind calciner, computerized feed proportioning system, hydraulic press, molding and management centre, baking furnace, longitudinal graphitizing furnace, ect.
 

Packaging & Shipping

Based mostly on the order fat and quantity, the sea transport, air delivery and courier shipment are chosen. 

 

FAQ

QI: Do you have catalogue? 

A: Indeed dear.Pls contact us to get the E-catalogue by e mail or trademanger or Skype.

Q2: Do you have pictures for this item? 

A: Sure pricey. We can supply you diverse postion photographs of the items for your reference.

Q3:What the parts good quality?

A: It’s with IS9001 certificate and we do 100% take a look at the products before the cargo.

This autumn: Does this merchandise is Oem good quality or for following market place?
 

A: It is for afer marketplace with 1 12 months guarantee.

Q5: What is actually the MOQ? 

A:1Ton(graphiteelectrode)1piece(graphiteplate/block).

Q6: What’s the Shipping Time?

A:It is about 15-thirty days afer get the payment.but Pls verify with our income for the inventory in advance.

Q7: Can we take a look at sample first? 

A: Of course pricey. but require to shell out the sample value and shipping and delivery value.

Why Choose Us

Superior graphite materials in China

Experienced engineering and technical personnel

Supply the best price-effectiveness answer

Substantial top quality solution and substantial-degree provider

Large pace growth

 

US $10-100
/ Piece
|
10 Pieces

(Min. Order)

###

Type: Graphite Bearing Ring
Composition: Graphite
Carbon Content: High-Carbon
Grade: Industrial Grade
Forming Way: Isostatic Graphite
Crystal Morphology: Compact Crystalline Graphite

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item Unit Guarantee Value Typical Value
Max Grain size mm 0.8 0.8
Bulk Density g/cm3 ≥1.72 1.75
Electric Resistance μΩ.m ≤9 8.3
Bending Strength MPa ≥14.5 17.5
Compressive Strength MPa ≥32 40
Thermal Conductivity W/(m▪K) ≥120 140
C.T.E(100-600)ºC 10-6/ºC ≤2.8 2.4
Ash Content % ≤0.2 0.09

###

    High pure graphite material
Item Unit baked three time baked four times
impregnated twice Impregnated three times
grain size mm ≤325mesh ≤325mesh
Bulk density g/cm3 ≥1.78 ≥1.85
Specific resistance μΩ.m ≤14 ≤13
Bending strength MPa ≥40 ≥45
Compressive strength MPa ≥60 ≥65
Ash content % ≤0.1 ≤0.05

###

Item Unit Isostatic graphite
grain size μm 5-22
Bulk density g/cm3 1.8-1.85
Specific resistance μΩ.m 10-15
Bending strength MPa ≥40
Compressive strength MPa ≥70
C.T.E.(100-600) °C 10-6/°C 3.2-5.2
Modulus of elasticity GPa 9.5-12.5
US $10-100
/ Piece
|
10 Pieces

(Min. Order)

###

Type: Graphite Bearing Ring
Composition: Graphite
Carbon Content: High-Carbon
Grade: Industrial Grade
Forming Way: Isostatic Graphite
Crystal Morphology: Compact Crystalline Graphite

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item Unit Guarantee Value Typical Value
Max Grain size mm 0.8 0.8
Bulk Density g/cm3 ≥1.72 1.75
Electric Resistance μΩ.m ≤9 8.3
Bending Strength MPa ≥14.5 17.5
Compressive Strength MPa ≥32 40
Thermal Conductivity W/(m▪K) ≥120 140
C.T.E(100-600)ºC 10-6/ºC ≤2.8 2.4
Ash Content % ≤0.2 0.09

###

    High pure graphite material
Item Unit baked three time baked four times
impregnated twice Impregnated three times
grain size mm ≤325mesh ≤325mesh
Bulk density g/cm3 ≥1.78 ≥1.85
Specific resistance μΩ.m ≤14 ≤13
Bending strength MPa ≥40 ≥45
Compressive strength MPa ≥60 ≥65
Ash content % ≤0.1 ≤0.05

###

Item Unit Isostatic graphite
grain size μm 5-22
Bulk density g/cm3 1.8-1.85
Specific resistance μΩ.m 10-15
Bending strength MPa ≥40
Compressive strength MPa ≥70
C.T.E.(100-600) °C 10-6/°C 3.2-5.2
Modulus of elasticity GPa 9.5-12.5

What is a bushing?

What is a bushing? Basically, bushings are spherical or spherical bearings for machines with sliding or rotating shaft assemblies. Due to their excellent load-carrying capacity and anti-friction properties, these bushings are used in almost all industrial applications. This makes them useful in industries such as construction, mining, agriculture, transportation, hydropower, food processing and material handling.
bushing

Shell information

The demand for bushings is closely related to the global transformer market. Growing renewable energy sources and high replacement rates of aging grid infrastructure are driving the global demand for transformer bushings. Increased urbanization is another factor driving the demand for transformer bushings. Among global regions, Asia Pacific is the largest market for medium voltage transformer bushings. The following section provides a detailed analysis of the market.
Bulk-type bushings are used for lower voltage ratings and consist of a center conductor stud or tube and an insulator housing. They are available in dry or oil filled versions, and their oil content is shared with the transformer main tank. However, the trend is slowly turning towards RIP bushings. Regardless of how different types of bushings are used, it is important to understand the difference between them.
A recent CZPT survey indicated that bushings account for 17% of all transformer failures. Among them, 30% caused fire accidents and 10% caused explosions. This is not a small risk, especially for such important electrical components as transformers. Because casing is so important, utilities are increasingly looking to preventative maintenance. However, this requires continuous monitoring of the bushing and its insulation. There are many benefits to using online condition monitoring.
One of the main benefits of locating and replacing faulty bushings is improved operability and safety. If you notice that your car is unstable in the corners, your bushings are worn. Anti-roll bar bushings can also be a sign of bushing damage. Do not ignore these warning signs as they can have dangerous consequences. To avoid these potential problems, make sure to get your vehicle serviced as soon as you notice any of these symptoms.
Be sure to park your vehicle on a level surface before you start changing your car bushings. You may need to unlock the hood latch and apply the brakes before continuing. Then, open the valve cover. This will allow you to see the engine area and bushings. You should also check that the wheels are not moving and avoid placing sharp objects in the engine bay. If you have time, open the hood and if you can see the bushings, turn on the headlights.
bushing

type

There are various types of bushings, each serving a different purpose. Oil-filled types are the most common and are designed for vertical installations. On the other hand, the embedded ferrule can accommodate the connection to the wire leads in the lower end of the ferrule. This feature significantly reduces the length of the sump end of the casing, but also adds additional complexity and cost.
There are two basic types of bushings. The first is a solid pour and the second is a capacitive graded variety. Solid cast bushings are typically used for low voltage transformer windings, while gas insulated bushings are insulated with pressurized gas. Gas-insulated bushings are also used in SF6 circuit breakers. If you are in the market for a new bushing, be sure to consider its cantilever strength and design.
Electrical bushings are an important part of various electrical equipment. They help carry high-voltage current through the enclosure and act as an insulator between a live conductor and a metal body at ground potential. Bulk-type bushings consist of a central conductive rod (usually copper or aluminum) and an insulator (silicone rubber compound or composite resin) surrounding the rod.
Transformers require transformer bushings. The construction and materials used in the bushing play a key role in the durability and longevity of the transformer. Transformers with weak bushings can fail, causing extensive damage. Moisture or voids can cause insulation breakdown, resulting in extensive electrical damage. Appropriate materials and optimized construction can reduce electric field stress and extend the life of the bushing.
Capacitor grading bushings are more expensive and are used in almost all high voltage systems. They use a conductive layer within the insulating layer between the center conductor and the insulator. Different manufacturers use different materials to produce these bushings. Earlier, capacitor grading bushings were made of concentric ceramic cylinders with metallized surfaces. They are also made from laminated cardboard tubes with conductive layers.

Function

A bushing is a support member that performs its function by acting as a washer and reducing noise and vibration. Bushings are used in valve covers and are made of corrosion-resistant materials to perform these functions. These products can be found in all types of machinery from cars to airplanes. Below are some common uses for bushings. Read on to discover more. Here are some of the most important features of the shell.
Electrical bushings transmit electricity. They can be used in circuit breakers, transformers, power capacitors and shunt reactors. The conductors of the bushing can be built directly into the bushing or through the bushing. Both current and voltage represent electricity. The bushing must have insulation capable of withstanding the voltage and its current-carrying conductors must be capable of carrying the rated current without overheating the adjacent insulation.
The bushing wraps around the stem, which is a relatively simple replacement part. It is a hardened part that prevents leaks and improves sealing. Plus, its low-cost replacement makes it a very easy-to-machine part. Bushings are also used in valves for guiding purposes. These two features make bushings an important part of many machines and applications. So, learn more about them.
Copper and brass are commonly used bushing materials. They have high compressive strength and high surface pressure. This material is suitable for bearings in low speed situations and heavy duty applications. Copper and brass are the most common types of casings, and they are both made in China. They are all relatively inexpensive and are available in a variety of materials and sizes. If you are considering purchasing a casing, keep in mind that it must meet national standards.
bushing

cost

Whether you’re looking for a replacement bushing for your rear suspension or just need to replace the fork, you have a few different options. The two main types of bushings are coated and uncoated. If you want to save money on bushing replacements, you should consider getting a cheaper lower fork. Whether you’re replacing bushings to improve ride quality or prevent damage to your wheel loader, you’ll find a bushing replacement option that fits your budget.
While most cars are compatible with bushings, some iconic parts from premium brands like BMW and Mercedes require special tools to replace. If you are not confident in your mechanical abilities, consider hiring a mechanic to do it. Mechanical replacement bushings typically range from $200 to $500. If you’re comfortable with mechanics and have some mechanical knowledge, you can save money by trying the job yourself. For example, control arm bushings range in price from $20 to $80. It is important to check the alignment after replacing the bushing to avoid further damage.
Control arm bushing replacements are usually relatively inexpensive, but you may need to replace several at the same time. You should check the prices of several mechanics before making a decision. You can easily save between $50 and $100 by comparing quotes. Plus, you’ll save a lot of money by finding the right mechanic for the job. You can also use an online comparison tool to compare prices. You can find a mechanic that suits your needs at an affordable price.
Control arm bushings are also an inexpensive way to replace parts of a car’s front or rear suspension. Typically, control arm bushings are made of two metal cylinders covered with a thick layer of rubber. They wear out due to accidents, potholes and off-roading. They are mounted with a bolt that goes through the inner barrel. It is important to replace these bushings as often as needed to improve operation.

China High Density Antimony Impregnated Carbon Graphite Bearing     wheel bearingChina High Density Antimony Impregnated Carbon Graphite Bearing     wheel bearing
editor by czh 2023-01-03

Recent Posts