China Custom High Quality 10X14X15 mm Bearing HK 1015 Drawn Cup Needle Roller Bearing HK1015 HK1016 HK10 manufacturer

Product Description

High Quality 10x14x15 mm Bearing HK 1015 Drawn Cup Needle Roller Bearing HK1015 HK1016 HK10

Description of High Quality 10x14x15 mm Bearing HK 1015 Drawn Cup Needle Roller Bearing HK1015 HK1016 HK10
1.Overview: Drawn cup needle roller bearings ,needle roller bearing support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The low cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
 
2.Advantages:needle roller bearing
– Smaller cross-section leading to greated rigidity,higher load-carrying capacity & lower inertia of the needle roller bearings help size and weight reductions in machinery.
– Though they are less wide,their load carrying capacity is high and is most suitable for applications where the load is high & the radial space is less.
– Needle roller bearings,which are designed to withstand oscillation can operate under severe conditions & interchange with sliding bearings
 
3.Applications:needle roller bearing
– Transmissions,transfer cases,engines & valve trains
-Steering and braking systems
– Axle support
-Outboard engines
 
3.Expanded Options
– Assemblies with bearings
– Engineered polymer cages
– Bearings with 1 or 2 seals
-Closed end bearings
– Oil holes
-Drawn sleeve
 
4.Needle roller bearing specifications & Standards:
-Dimensions:the boundary dimensions of the drawn cup needle roller bearings are in accordance with ISO
-Bore size:Its size is meassured in millimeters.The bore is a hollow cylindrical chamber or barrel shaped where the metal balls  are placed.
-Outer ring width:It is the width of the outer ring measured in millimeters.
 
5.Markets: needle roller bearing or needle bearing for Transmissions, transfer cases, engines, valve trains, steering and braking systems, axle supports,outboard engines, power tools, copiers, fax machines, paper-moving equipment and appliances.
 
Parameter of High Quality 10x14x15 mm Bearing HK 1015 Drawn Cup Needle Roller Bearing HK1015 HK1016 HK10

Bearing Designation Boundary Dimensions Basic Load Ratings Limiting Speed
HK BK Fw D C Cr Dynamic Cor Static Oil
mm mm mm Nm Nm
HK0306TN BK0306TN 3 6.5 6 1320 950 60000
HK0408TN BK0408TN 4 8 8 1540 1070 40000
HK0509 BK0509 5 9 9 2200 1790 36000
HK0608 6 10 8 1830 1550 32000
HK0609 BK0609 6 10 9 2650 2400 3000
HK0708 7 11 8 2800 2150 27000
HK0709 BK0709 7 11 9 2800 2150 27000
HK0808 BK0808 8 12 8 2550 2400 21000
HK571 BK571 8 12 10 3700 3450 21000
HK571 BK571 9 13 10 4050 4250 25000
HK571 9 13 12 5000 6000 25000
HK1571 BK1571 10 14 10 3900 4800 19000
HK1012 BK1012 10 14 10 5000 6300 19000
HK1015 10 14 15 6700 7800 19000
HK1210 BK1210 12 16 10 4150 5800 19000
HK1212 BK1212 12 18 12 3800 5100 15000
HK1312 BK1312 13 19 12 6200 7100 17000
HK1412 14 20 12 6800 7500 14000
HK1416 14 20 16 7300 9000 14000
HK1512 BK1512 15 21 12 7000 8400 14000
HK1514 15 21 14 8500 10400 13000
HK1515 15 21 15 9100 11400 13000
HK1516 BK1516 15 21 16 9800 11400 14000
HK1522 15 21 22 10400 16500 14000
HK1612 BK1612 16 22 12 7100 9200 14000
HK1614 16 22 14 8800 9900 12000
HK1616 BK1616 16 22 16 15710 14300 14000
HK1622 16 22 22 11100 17400 14000
HK1712 17 23 12 6900 9300 13000
HK1714 17 23 14 6800 15710 10000
HK1716 17 23 16 8500 12500 10000
HK1718 17 23 18 9500 10600 10000
HK1812 18 24 12 7100 9900 12000
HK1816 BK1816 18 24 16 10600 15300 12000
HK2571 20 26 10 5900 7200 10000
HK2014 20 26 14 9700 18100 9000
HK2016 BK2016 20 26 16 11700 29100 10000

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Cage: With Cage
Rows Number: Single
Load Direction: Thrust Bearing
Style: With Outer Ring, Without Inner Ring
Material: St14
Type: Open
Customization:
Available

|

Customized Request

cup bearing

Impact of Proper Installation and Alignment on Cup Bearing Performance

Proper installation and alignment are critical factors that significantly impact the performance and longevity of cup bearings in machinery and equipment. Here’s how they influence bearing performance:

1. Load Distribution: Correct installation ensures that the load is evenly distributed across the bearing’s raceways. Improper alignment can lead to concentrated loads on specific areas, causing premature wear and potential bearing failure.

2. Reduced Friction: Precise installation and alignment help minimize friction within the bearing, which is essential for smooth operation and energy efficiency. Reduced friction can also lead to less heat generation.

3. Noise and Vibration: Proper alignment reduces noise and vibration levels, promoting a quieter and more comfortable working environment. Misalignment can result in increased noise and unwanted vibrations.

4. Longevity: When installed correctly and aligned accurately, cup bearings are more likely to reach their expected service life without experiencing premature failure due to uneven wear and damage.

5. Performance Consistency: Well-aligned cup bearings deliver consistent and predictable performance, which is essential in applications where precision and reliability are paramount.

6. Maintenance Reduction: Correctly installed and aligned cup bearings typically require less maintenance and lubrication, as they experience less wear and tear during operation.

Proper installation and alignment involve following the manufacturer’s guidelines, utilizing suitable tools and equipment, and ensuring that the bearing is correctly seated and aligned with the mating components. Any deviations from the recommended installation and alignment procedures can lead to reduced bearing life and potential operational issues.

cup bearing

Eco-Friendly Aspects of Cup Bearing Materials

Cup bearing materials can have eco-friendly or sustainable aspects depending on the material chosen and its recyclability or environmental impact:

1. Stainless Steel: Stainless steel is known for its corrosion resistance, which can extend the lifespan of cup bearings and reduce the need for replacements. This longevity can contribute to sustainability by minimizing the disposal of worn-out bearings.

2. Recyclability: Many cup bearing materials, such as steel and bronze, are highly recyclable. At the end of their useful life, these materials can be melted down and reused, reducing the demand for new raw materials and energy consumption.

3. Reduced Lubrication: Some cup bearings are designed for extended periods of maintenance-free operation due to self-lubrication or special coatings. This can reduce the consumption of lubricants and the disposal of used oils, promoting eco-friendliness.

4. Non-Toxic Materials: Materials used in cup bearings are typically non-toxic and do not pose environmental or health hazards. This ensures that their manufacture and disposal do not harm ecosystems or human health.

5. Sustainable Sourcing: Manufacturers often focus on responsibly sourcing materials, ensuring they come from suppliers who adhere to sustainable practices, including reforestation, waste reduction, and energy efficiency.

When selecting cup bearings for a specific application, considering the eco-friendliness of the chosen material is essential. Manufacturers and suppliers may also provide information on the sustainability practices associated with their bearing materials.

cup bearing

Comparison of Cup Bearings with Other Bearing Types

Cup bearings, also known as tapered roller bearings, differ from other bearing types like ball bearings and roller bearings in several ways:

1. Load Capacity: Cup bearings are designed to handle both radial and axial loads, making them suitable for applications with combined forces. Ball bearings primarily handle radial loads, while roller bearings, including cup bearings, can manage both radial and axial loads.

2. Tapered Design: Cup bearings have a tapered design, which helps distribute loads more evenly, reducing the risk of damaging the bearings. Ball bearings have a different internal structure with small, spherical rolling elements, while roller bearings have cylindrical or tapered rollers.

3. Precision and Accuracy: Ball bearings, especially precision ball bearings, offer high levels of accuracy and low friction, making them suitable for applications where precise movement is essential. Cup bearings can provide precision but are typically used in applications with moderate to heavy loads.

4. Lubrication: Lubrication requirements can vary among bearing types. Cup bearings typically require adequate lubrication to operate efficiently. Ball bearings may need less lubrication due to their low friction design.

5. Versatility: Ball bearings and roller bearings come in various configurations, making them versatile for different applications. Cup bearings are primarily used in applications where tapered rollers are advantageous, such as automotive wheel hubs and gearboxes.

6. Specialized Applications: Some applications may benefit from specialized bearings like ball screws with ball bearings for high precision linear motion or spherical roller bearings for applications that require misalignment compensation.

The choice between cup bearings, ball bearings, and roller bearings depends on the specific needs of the application, including the type and magnitude of loads, operating conditions, and precision requirements. Each bearing type has its advantages and limitations, making proper selection essential for optimal performance and longevity.

China Custom High Quality 10X14X15 mm Bearing HK 1015 Drawn Cup Needle Roller Bearing HK1015 HK1016 HK10   manufacturerChina Custom High Quality 10X14X15 mm Bearing HK 1015 Drawn Cup Needle Roller Bearing HK1015 HK1016 HK10   manufacturer
editor by CX 2024-04-16

Recent Posts